</para>
</listitem>
</varlistentry>
-
+
<varlistentry>
- <term>relevance / sort / mergekey / facet</term>
+ <term>icu_chain</term>
<listitem>
<para>
Specifies character set normalization for relevancy / sorting /
mergekey and facets - for the server. These definitions serves as
default for services that don't have these given. For the meaning
- of these settings refer to the "relevance" element inside service.
+ of these settings refer to the
+ <xref linkend="icuchain"/> element inside service.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>relevance / sort / mergekey / facet</term>
+ <listitem>
+ <para>
+ Obsolete. Use element icu_chain instead.
</para>
</listitem>
</varlistentry>
Specifies that this element is to be used to
help rank
records against the user's query (when ranking is
- requested). The value is an integer, used as a
- multiplier against the basic TF*IDF score. A value of
- 1 is the base, higher values give additional
- weight to
+ requested).
+ The valus is of the form
+ <literallayout>
+ M [F N]
+ </literallayout>
+ where M is an integer, used as a
+ weight against the basic TF*IDF score. A value of
+ 1 is the base, higher values give additional weight to
elements of this type. The default is '0', which
excludes this element from the rank calculation.
</para>
+ <para>
+ F is a CCL field and N is the multipler for terms
+ that matches those part of the CCL field in search.
+ The F+N combo allows the system to use a different
+ multipler for a certain field. For example, a rank value of
+ "<literal>1 au 3</literal>" gives a multipler of 3 for
+ all terms part of the au(thor) terms and 1 for everything else.
+ </para>
+ <para>
+ For Pazpar2 1.6.13 and later, the rank may also defined
+ "per-document", by the normalization stylesheet.
+ </para>
+ <para>
+ The per field rank was introduced in Pazpar2 1.6.15. Earlier
+ releases only allowed a rank value M (simple integer).
+ </para>
+ See <xref linkend="relevance_ranking"/> for more
+ about ranking.
</listitem>
</varlistentry>
</para>
</listitem>
</varlistentry>
+
+ <varlistentry>
+ <term id="facetrule">facetrule</term>
+ <listitem>
+ <para>
+ Specifies the ICU rule set to be used for normalizing
+ facets. If facetrule is omitted from metadata, the
+ rule set 'facet' is used.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term id="metadata_limitmap">limitmap</term>
+ <listitem>
+ <para>
+ Specifies a default limitmap for this field. This is to avoid mass
+ configuring of targets. However it is important to review/do this on a per
+ target since it is usually target-specific. See limitmap for format.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term id="metadata_facetmap">facetmap</term>
+ <listitem>
+ <para>
+ Specifies a default facetmap for this field. This is to avoid mass
+ configuring of targets. However it is important to review/do this on a per
+ target since it is usually target-specific. See facetmap for format.
+ </para>
+ </listitem>
+ </varlistentry>
<varlistentry>
<term>setting</term>
</listitem>
</varlistentry>
-
+
<varlistentry>
- <term>relevance</term>
+ <term id="servicexslt" xreflabel="xslt">xslt</term>
<listitem>
<para>
- Specifies ICU tokenization and transformation rules
- for tokens that are used in Pazpar2's relevance ranking.
- The 'id' attribute is currently not used, and the 'locale'
- attribute must be set to one of the locale strings
+ Defines a XSLT stylesheet. The <literal>xslt</literal>
+ element takes exactly one attribute <literal>id</literal>
+ which names the stylesheet. This can be referred to in target
+ settings <xref linkend="pzxslt"/>.
+ </para>
+ <para>
+ The content of the xslt element is the embedded stylesheet XML
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term id="icuchain" xreflabel="icu_chain">icu_chain</term>
+ <listitem>
+ <para>
+ Specifies a named ICU rule set. The icu_chain element must include
+ attribute 'id' which specifies the identifier (name) for the ICU
+ rule set.
+ Pazpar2 uses the particular rule sets for particular purposes.
+ Rule set 'relevance' is used to normalize
+ terms for relevance ranking. Rule set 'sort' is used to
+ normalize terms for sorting. Rule set 'mergekey' is used to
+ normalize terms for making a mergekey and, finally. Rule set 'facet'
+ is normally used to normalize facet terms, unless
+ <xref linkend="facetrule">facetrule</xref> is given for a
+ metadata field.
+ </para>
+ <para>
+ The icu_chain element must also include a 'locale'
+ attribute which must be set to one of the locale strings
defined in ICU. The child elements listed below can be
in any order, except the 'index' element which logically
belongs to the end of the list. The stated tokenization,
</varlistentry>
<varlistentry>
+ <term>relevance</term>
+ <listitem>
+ <para>
+ Specifies the ICU rule set used for relevance ranking.
+ The child element of 'relevance' must be 'icu_chain' and the
+ 'id' attribute of the icu_chain is ignored. This
+ definition is obsolete and should be replaced by the equivalent
+ construct:
+ <screen>
+ <icu_chain id="relevance" locale="en">..<icu_chain>
+ </screen>
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
<term>sort</term>
<listitem>
<para>
- Specifies ICU tokenization and transformation rules
- for tokens that are used in Pazpar2's sorting. The contents
- is similar to that of <literal>relevance</literal>.
+ Specifies the ICU rule set used for sorting.
+ The child element of 'sort' must be 'icu_chain' and the
+ 'id' attribute of the icu_chain is ignored. This
+ definition is obsolete and should be replaced by the equivalent
+ construct:
+ <screen>
+ <icu_chain id="sort" locale="en">..<icu_chain>
+ </screen>
</para>
</listitem>
</varlistentry>
<listitem>
<para>
Specifies ICU tokenization and transformation rules
- for tokens that are used in Pazpar2's mergekey. The contents
- is similar to that of <literal>relevance</literal>.
+ for tokens that are used in Pazpar2's mergekey.
+ The child element of 'mergekey' must be 'icu_chain' and the
+ 'id' attribute of the icu_chain is ignored. This
+ definition is obsolete and should be replaced by the equivalent
+ construct:
+ <screen>
+ <icu_chain id="mergekey" locale="en">..<icu_chain>
+ </screen>
</para>
</listitem>
</varlistentry>
<listitem>
<para>
Specifies ICU tokenization and transformation rules
- for tokens that are used in Pazpar2's facets. The contents
- is similar to that of <literal>relevance</literal>.
+ for tokens that are used in Pazpar2's facets.
+ The child element of 'facet' must be 'icu_chain' and the
+ 'id' attribute of the icu_chain is ignored. This
+ definition is obsolete and should be replaced by the equivalent
+ construct:
+ <screen>
+ <icu_chain id="facet" locale="en">..<icu_chain>
+ </screen>
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>ccldirective</term>
+ <listitem>
+ <para>
+ Customizes the CCL parsing (interpretation of query parameter
+ in search).
+ The name and value of the CCL directive is gigen by attributes
+ 'name' and 'value' respectively. Refer to possible list of names
+ in the
+ <ulink
+ url="http://www.indexdata.com/yaz/doc/tools.html#ccl.directives.table">
+ YAZ manual
+ </ulink>.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>rank</term>
+ <listitem>
+ <para>
+ Customizes the ranking (relevance) algorithm. Also known as
+ rank tweaks. The rank element
+ accepts the following attributes - all being optional:
+ </para>
+ <variablelist>
+ <varlistentry>
+ <term>cluster</term>
+ <listitem>
+ <para>
+ Attribute 'cluster' is a boolean
+ that controls whether Pazpar2 should boost ranking for merged
+ records. Is 'yes' by default. A value of 'no' will make
+ Pazpar2 average ranking of each record in a cluster.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>debug</term>
+ <listitem>
+ <para>
+ Attribute 'debug' is a boolean
+ that controls whether Pazpar2 should include details
+ about ranking for each document in the show command's
+ response. Enable by using value "yes", disable by using
+ value "no" (default).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>follow</term>
+ <listitem>
+ <para>
+ Attribute 'follow' is a a floating point number greater than
+ or equal to 0. A positive number will boost weight for terms
+ that occur close to each other (proximity, distance).
+ A value of 1, will double the weight if two terms are in
+ proximity distance of 1 (next to each other). The default
+ value of 'follow' is 0 (order will not affect weight).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>lead</term>
+ <listitem>
+ <para>
+ Attribute 'lead' is a floating point number.
+ It controls if term weight should be reduced by position
+ from start in a metadata field. A positive value of 'lead'
+ will reduce weight as it apperas further away from the lead
+ of the field. Default value is 0 (no reduction of weight by
+ position).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>length</term>
+ <listitem>
+ <para>
+ Attribute 'length' determines how/if term weight should be
+ divided by lenght of metadata field. A value of "linear"
+ divide by length. A value of "log" will divide by log2(length).
+ A value of "none" will leave term weight as is (no division).
+ Default value is "linear".
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ <para>
+ Refer to <xref linkend="relevance_ranking"/> to see how
+ these tweaks are used in computation of score.
+ </para>
+ <para>
+ Customization of ranking algorithm was introduced with
+ Pazpar2 1.6.18. The semantics of some of the fields changed
+ in versions up to 1.6.22.
</para>
</listitem>
</varlistentry>
+ <varlistentry id="sort-default">
+ <term>sort-default</term>
+ <listitem>
+ <para>
+ Specifies the default sort criteria (default 'relevance'),
+ which previous was hard-coded as default criteria in search.
+ This is a fix/work-around to avoid re-searching when using
+ target-based sorting. In order for this to work efficient,
+ the search must also have the sort critera parameter; otherwise
+ pazpar2 will do re-searching on search criteria changes, if
+ changed between search and show command.
+ </para>
+ <para>
+ This configuration was added in pazpar2 1.6.20.
+ </para>
+ </listitem>
+ </varlistentry>
+
+<!--
+ <varlistentry>
+ <term>set</term>
+ <listitem>
+ <para>
+ Specifies a variable that will be inherited by all targets defined in settings
+ <screen>
+ <set name="test" value="en"..<set>
+ </screen>
+ </para>
+ </listitem>
+ </varlistentry>
+-->
<varlistentry>
<term>settings</term>
<listitem>
type="year" merge="range" termlist="yes"/>
<metadata name="author" brief="yes" termlist="yes"
merge="longest" rank="2"/>
- <metadata name="subject" merge="unique" termlist="yes" rank="3"/>
+ <metadata name="subject" merge="unique" termlist="yes" rank="3" limitmap="local:"/>
<metadata name="url" merge="unique"/>
- <relevance>
- <icu_chain id="relevance" locale="el">
- <transform rule="[:Control:] Any-Remove"/>
- <tokenize rule="l"/>
- <transform rule="[[:WhiteSpace:][:Punctuation:]] Remove"/>
- <casemap rule="l"/>
- </icu_chain>
- </relevance>
+ <icu_chain id="relevance" locale="el">
+ <transform rule="[:Control:] Any-Remove"/>
+ <tokenize rule="l"/>
+ <transform rule="[[:WhiteSpace:][:Punctuation:]] Remove"/>
+ <casemap rule="l"/>
+ </icu_chain>
<settings src="mysettings"/>
<timeout session="60"/>
<service>
<note>
<para>
- The following discussion of practical issues related to session and settings
- management are cast in terms of a user interface based on Ajax/Javascript
- technology. It would apply equally well to many other kinds of browser-based logic.
+ The following discussion of practical issues related to session
+ and settings management are cast in terms of a user interface based on
+ Ajax/Javascript technology. It would apply equally well to many other
+ kinds of browser-based logic.
</para>
</note>
<para>
- Typically, a Javascript client is not allowed to directly alter the parameters
- of a session. There are two reasons for this. One has to do with access
- to information; typically, information about a user will be stored in a
- system on the server side, or it will be accessible in some way from the server.
- However, since the Javascript client cannot be entirely trusted (some hostile
- agent might in fact 'pretend' to be a regular ws client), it is more robust
- to control session settings from scripting that you run as part of your
- webserver. Typically, this can be handled during the session initialization,
- as follows:
+ Typically, a Javascript client is not allowed to directly alter the
+ parameters of a session. There are two reasons for this. One has to do
+ with access to information; typically, information about a user will
+ be stored in a system on the server side, or it will be accessible in
+ some way from the server. However, since the Javascript client cannot
+ be entirely trusted (some hostile agent might in fact 'pretend' to be
+ a regular ws client), it is more robust to control session settings
+ from scripting that you run as part of your webserver. Typically, this
+ can be handled during the session initialization, as follows:
</para>
<para>
- Step 1: The Javascript client loads, and asks the webserver for a new Pazpar2
- session ID. This can be done using a Javascript call, for instance. Note that
- it is possible to submit Ajax HTTPXmlRequest calls either to Pazpar2 or to the
- webserver that Pazpar2 is proxying for. See (XXX Insert link to Pazpar2 protocol).
+ Step 1: The Javascript client loads, and asks the webserver for a
+ new Pazpar2 session ID. This can be done using a Javascript call, for
+ instance. Note that it is possible to submit Ajax HTTPXmlRequest calls
+ either to Pazpar2 or to the webserver that Pazpar2 is proxying
+ for. See (XXX Insert link to Pazpar2 protocol).
</para>
<para>
</para>
<para>
- Step 3: The webserver initializes a new Pazpar2 settings, and sets user-specific
- parameters as necessary, using the init webservice command. A new session ID is
- returned.
+ Step 3: The webserver initializes a new Pazpar2 settings, and sets
+ user-specific parameters as necessary, using the init webservice
+ command. A new session ID is returned.
</para>
<para>
- Step 4: The webserver returns this session ID to the Javascript client, which then
- uses the session ID to submit searches, show results, etc.
+ Step 4: The webserver returns this session ID to the Javascript
+ client, which then uses the session ID to submit searches, show
+ results, etc.
</para>
<para>
- Step 5: When the Javascript client ceases to use the session, Pazpar2 destroys
- any session-specific information.
+ Step 5: When the Javascript client ceases to use the session,
+ Pazpar2 destroys any session-specific information.
</para>
<refsect2>
<para>
Each file contains a root element named <settings>. It may
contain one or more <set> elements. The settings and set
- elements may contain the following attributes. Attributes in the set node
- overrides those in the setting root element. Each set node must
+ elements may contain the following attributes. Attributes in the set
+ node overrides those in the setting root element. Each set node must
specify (directly, or inherited from the parent node) at least a
target, name, and value.
</para>
multiple overlapping settings with the same name and target
value, the 'precedence' attribute determines what happens.
</para>
+ <para>
+ For Pazpar2 1.6.4 or later, the target ID may be user-defined, in
+ which case, the actual host, port, etc is given by setting
+ <xref linkend="pzurl"/>.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
</varlistentry>
<varlistentry>
- <term>pz:xslt</term>
+ <term id="pzxslt" xreflabel="pz:xslt">pz:xslt</term>
<listitem>
<para>
- Is a comma separated list of of files that specifies
+ Is a comma separated list of of stylesheet names that specifies
how to convert incoming records to the internal representation.
</para>
<para>
+ For each name, the embedded stylesheets (XSL) that comes with the
+ service definition are consulted first and takes precedence over
+ external files; see <xref linkend="servicexslt"/>
+ of service definition).
+ If the name does not match an embedded stylesheet it is
+ considered a filename.
+ </para>
+ <para>
The suffix of each file specifies the kind of tranformation.
Suffix "<literal>.xsl</literal>" makes an XSL transform. Suffix
"<literal>.mmap</literal>" will use the MMAP transform (described below).
</listitem>
</varlistentry>
<varlistentry>
+ <term>pz:presentchunk</term>
+ <listitem>
+ <para>
+ Controls the chunk size in present requests. Pazpar2 will
+ make (maxrecs / chunk) request(s). The default is 20.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
<term>pz:id</term>
<listitem>
<para>
<listitem>
<para>
This setting enables
- <ulink url="&url.sru;">SRU</ulink>/<ulink url="&url.solr;">SOLR</ulink>
+ <ulink url="&url.sru;">SRU</ulink>/<ulink url="&url.solr;">Solr</ulink>
support.
It has four possible settings.
'get', enables SRU access through GET requests. 'post' enables SRU/POST
the protocol.
</para>
<para>
- A value of 'solr' anables SOLR client support. This is supported
+ A value of 'solr' enables Solr client support. This is supported
for Pazpar version 1.5.0 and later.
</para>
</listitem>
<para>
This allows SRU version to be specified. If unset Pazpar2
will the default of YAZ (currently 1.2). Should be set
- to 1.1 or 1.2. For SOLR, the current supported/tested version is 1.4
+ to 1.1 or 1.2. For Solr, the current supported/tested version is 1.4 and 3.x.
</para>
</listitem>
</varlistentry>
<listitem>
<para>
Allows you to specify an arbitrary PQF query language substring.
- The provided string is prefixed the user's query after it has been
+ The provided string is prefixed to the user's query after it has been
normalized to PQF internally in pazpar2.
This allows you to attach complex 'filters' to queries for a given
target, sometimes necessary to select sub-catalogs
<literal>@and @attr 1=30 @attr 2=3 %Y %%</literal>
would search for current year combined with the original PQF (%%).
</para>
+ <para>
+ This setting can also be used as more general alternative to
+ pz:pqf_prefix -- a way of embedding the submitted query
+ anywhere in the string rather than appending it to prefix. For
+ example, if it is desired to omit all records satisfying the
+ query <literal>@attr 1=pica.bib 0007</literal> then this
+ subquery can be combined with the submitted query as the second
+ argument of <literal>@andnot</literal> by using the
+ pz:pqf_strftime value <literal>@not %% @attr 1=pica.bib
+ 0007</literal>.
+ </para>
</listitem>
</varlistentry>
<listitem>
<para>
Specifies a filter which allows Pazpar2 to only include
- records that meet a certain criteria in a result. Unmatched records
- will be ignored. The filter takes the form name, name~value, or name=value, which
+ records that meet a certain criteria in a result.
+ Unmatched records will be ignored.
+ The filter takes the form name, name~value, or name=value, which
will include only records with metadata element (name) that has the
- substring (~value) given, or matches exactly (=value). If value is omitted all records
- with the named
- metadata element present will be included.
+ substring (~value) given, or matches exactly (=value).
+ If value is omitted all records with the named metadata element
+ present will be included.
</para>
</listitem>
</varlistentry>
<term>pz:preferred</term>
<listitem>
<para>
- Specifies that a target is preferred, e.g. possible local, faster target. Using block=pref on show command
- will wait for all these targets to return records before releasing the block. If no target is preferred,
- the block=pref will identical to block=1, which release when one target has returned records.
+ Specifies that a target is preferred, e.g. possible local, faster
+ target. Using block=pref on show command will wait for all these
+ targets to return records before releasing the block.
+ If no target is preferred, the block=pref will identical to block=1,
+ which release when one target has returned records.
</para>
</listitem>
</varlistentry>
-
<varlistentry>
<term>pz:block_timeout</term>
<listitem>
<para>
- (Not yet implemented). Specifies the time for which a block should be released anyway.
+ (Not yet implemented).
+ Specifies the time for which a block should be released anyway.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>pz:termlist_term_count</term>
+ <listitem>
+ <para>
+ Specifies number of facet terms to be requested from the target.
+ The default is unspecified e.g. server-decided. Also see pz:facetmap.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>pz:termlist_term_factor</term>
+ <listitem>
+ <para>
+ Specifies whether to use a factor for pazpar2 generated facets (1) or not (0).
+ When mixing locallly generated (by the downloaded (pz:maxrecs) samples)
+ facet with native (target-generated) facets, the later will dominated the dominate the facet list
+ since they are generated based on the complete result set.
+ By scaling up the facet count using the ratio between total hit count and the sample size,
+ the total facet count can be approximated and thus better compared with native facets.
+ This is not enabled by default.
</para>
</listitem>
</varlistentry>
</para>
<note>
<para>
- At this point only SOLR targets have been tested with this
+ At this point only Solr targets have been tested with this
facility.
</para>
</note>
</listitem>
</varlistentry>
- <varlistentry>
+ <varlistentry id="limitmap">
<term>pz:limitmap:<replaceable>name</replaceable></term>
<listitem>
<para>
Specifies attributes for limiting a search to a field - using
- the limit parameter for search. In some cases the mapping of
+ the limit parameter for search. It can be used to filter locally
+ or remotely (search in a target). In some cases the mapping of
a field to a value is identical to an existing cclmap field; in
other cases the field must be specified in a different way - for
example to match a complete field (rather than parts of a subfield).
</para>
<para>
- The value of limitmap may have one of two forms: referral to
- an exisiting CCL field or a raw PQF string. Leading string
- determines type; either <literal>ccl:</literal> for CCL field or
- <literal>rpn:</literal> for PQF/RPN.
+ The value of limitmap may have one of three forms: referral to
+ an existing CCL field, a raw PQF string or a local limit. Leading string
+ determines type; either <literal>ccl:</literal> for CCL field,
+ <literal>rpn:</literal> for PQF/RPN, or <literal>local:</literal>
+ for filtering in Pazpar2. The local filtering may be followed
+ by a field a metadata field (default is to use the name of the
+ limitmap itself).
</para>
<note>
<para>
The limitmap facility is supported for Pazpar2 version 1.6.0.
+ Local filtering is supported in Pazpar2 1.6.6.
+ </para>
+ </note>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry id="pzurl">
+ <term>pz:url</term>
+ <listitem>
+ <para>
+ Specifies URL for the target and overrides the target ID.
+ </para>
+ <note>
+ <para>
+ <literal>pz:url</literal> is only recognized for
+ Pazpar2 1.6.4 and later.
+ </para>
+ </note>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry id="pzsortmap">
+ <term>pz:sortmap:<replaceable>field</replaceable></term>
+ <listitem>
+ <para>
+ Specifies native sorting for a target where
+ <replaceable>field</replaceable> is a sort criteria (see command
+ show). The value has to components separated by colon: strategy and
+ native-field. Strategy is one of <literal>z3950</literal>,
+ <literal>type7</literal>, <literal>cql</literal>,
+ <literal>sru11</literal>, or <literal>embed</literal>.
+ The second component, native-field, is the field that is recognized
+ by the target.
+ </para>
+ <note>
+ <para>
+ Only supported for Pazpar2 1.6.4 and later.
</para>
</note>
</listitem>
</varlistentry>
</variablelist>
-
+
</refsect2>
</refsect1>