Specifies that this element is to be used to
help rank
records against the user's query (when ranking is
- requested). The value is an integer, used as a
- multiplier against the basic TF*IDF score. A value of
- 1 is the base, higher values give additional
- weight to
+ requested).
+ The valus is of the form
+ <literallayout>
+ M [F N]
+ </literallayout>
+ where M is an integer, used as a
+ weight against the basic TF*IDF score. A value of
+ 1 is the base, higher values give additional weight to
elements of this type. The default is '0', which
excludes this element from the rank calculation.
</para>
+ <para>
+ F is a CCL field and N is the multipler for terms
+ that matches those part of the CCL field in search.
+ The F+N combo allows the system to use a different
+ multipler for a certain field. For example, a rank value of
+ "<literal>1 au 3</literal>" gives a multipler of 3 for
+ all terms part of the au(thor) terms and 1 for everything else.
+ </para>
+ <para>
+ For Pazpar2 1.6.13 and later, the rank may also defined
+ "per-document", by the normalization stylesheet.
+ </para>
+ <para>
+ The per field rank was introduced in Pazpar2 1.6.15. Earlier
+ releases only allowed a rank value M (simple integer).
+ </para>
+ See <xref linkend="relevance_ranking"/> for more
+ about ranking.
</listitem>
</varlistentry>
</varlistentry>
<varlistentry>
+ <term id="limitcluster">limitcluster</term>
+ <listitem>
+ <para>
+ Allow a limit on merged metadata. The value of this attribute
+ is the name of actual metadata content to be used for matching
+ (most often same name as metadata name).
+ </para>
+ <note>
+ <para>
+ Requires Pazpar2 1.6.23 or later.
+ </para>
+ </note>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term id="metadata_limitmap">limitmap</term>
+ <listitem>
+ <para>
+ Specifies a default limitmap for this field. This is to avoid mass
+ configuring of targets. However it is important to review/do this on a per
+ target since it is usually target-specific. See limitmap for format.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term id="metadata_facetmap">facetmap</term>
+ <listitem>
+ <para>
+ Specifies a default facetmap for this field. This is to avoid mass
+ configuring of targets. However it is important to review/do this on a per
+ target since it is usually target-specific. See facetmap for format.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
<term>setting</term>
<listitem>
<para>
</para>
</listitem>
</varlistentry>
+
+ <varlistentry>
+ <term>ccldirective</term>
+ <listitem>
+ <para>
+ Customizes the CCL parsing (interpretation of query parameter
+ in search).
+ The name and value of the CCL directive is gigen by attributes
+ 'name' and 'value' respectively. Refer to possible list of names
+ in the
+ <ulink
+ url="http://www.indexdata.com/yaz/doc/tools.html#ccl.directives.table">
+ YAZ manual
+ </ulink>.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>rank</term>
+ <listitem>
+ <para>
+ Customizes the ranking (relevance) algorithm. Also known as
+ rank tweaks. The rank element
+ accepts the following attributes - all being optional:
+ </para>
+ <variablelist>
+ <varlistentry>
+ <term>cluster</term>
+ <listitem>
+ <para>
+ Attribute 'cluster' is a boolean
+ that controls whether Pazpar2 should boost ranking for merged
+ records. Is 'yes' by default. A value of 'no' will make
+ Pazpar2 average ranking of each record in a cluster.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>debug</term>
+ <listitem>
+ <para>
+ Attribute 'debug' is a boolean
+ that controls whether Pazpar2 should include details
+ about ranking for each document in the show command's
+ response. Enable by using value "yes", disable by using
+ value "no" (default).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>follow</term>
+ <listitem>
+ <para>
+ Attribute 'follow' is a a floating point number greater than
+ or equal to 0. A positive number will boost weight for terms
+ that occur close to each other (proximity, distance).
+ A value of 1, will double the weight if two terms are in
+ proximity distance of 1 (next to each other). The default
+ value of 'follow' is 0 (order will not affect weight).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>lead</term>
+ <listitem>
+ <para>
+ Attribute 'lead' is a floating point number.
+ It controls if term weight should be reduced by position
+ from start in a metadata field. A positive value of 'lead'
+ will reduce weight as it apperas further away from the lead
+ of the field. Default value is 0 (no reduction of weight by
+ position).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>length</term>
+ <listitem>
+ <para>
+ Attribute 'length' determines how/if term weight should be
+ divided by lenght of metadata field. A value of "linear"
+ divide by length. A value of "log" will divide by log2(length).
+ A value of "none" will leave term weight as is (no division).
+ Default value is "linear".
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ <para>
+ Refer to <xref linkend="relevance_ranking"/> to see how
+ these tweaks are used in computation of score.
+ </para>
+ <para>
+ Customization of ranking algorithm was introduced with
+ Pazpar2 1.6.18. The semantics of some of the fields changed
+ in versions up to 1.6.22.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry id="sort-default">
+ <term>sort-default</term>
+ <listitem>
+ <para>
+ Specifies the default sort criteria (default 'relevance'),
+ which previous was hard-coded as default criteria in search.
+ This is a fix/work-around to avoid re-searching when using
+ target-based sorting. In order for this to work efficient,
+ the search must also have the sort critera parameter; otherwise
+ pazpar2 will do re-searching on search criteria changes, if
+ changed between search and show command.
+ </para>
+ <para>
+ This configuration was added in pazpar2 1.6.20.
+ </para>
+ </listitem>
+ </varlistentry>
+
+<!--
+ <varlistentry>
+ <term>set</term>
+ <listitem>
+ <para>
+ Specifies a variable that will be inherited by all targets defined in settings
+ <screen>
+ <set name="test" value="en"..<set>
+ </screen>
+ </para>
+ </listitem>
+ </varlistentry>
+-->
<varlistentry>
<term>settings</term>
<listitem>
type="year" merge="range" termlist="yes"/>
<metadata name="author" brief="yes" termlist="yes"
merge="longest" rank="2"/>
- <metadata name="subject" merge="unique" termlist="yes" rank="3"/>
+ <metadata name="subject" merge="unique" termlist="yes" rank="3" limitmap="local:"/>
<metadata name="url" merge="unique"/>
<icu_chain id="relevance" locale="el">
<transform rule="[:Control:] Any-Remove"/>
</listitem>
</varlistentry>
<varlistentry>
+ <term>pz:presentchunk</term>
+ <listitem>
+ <para>
+ Controls the chunk size in present requests. Pazpar2 will
+ make (maxrecs / chunk) request(s). The default is 20.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
<term>pz:id</term>
<listitem>
<para>
<listitem>
<para>
This setting enables
- <ulink url="&url.sru;">SRU</ulink>/<ulink url="&url.solr;">SOLR</ulink>
+ <ulink url="&url.sru;">SRU</ulink>/<ulink url="&url.solr;">Solr</ulink>
support.
It has four possible settings.
'get', enables SRU access through GET requests. 'post' enables SRU/POST
the protocol.
</para>
<para>
- A value of 'solr' anables SOLR client support. This is supported
+ A value of 'solr' enables Solr client support. This is supported
for Pazpar version 1.5.0 and later.
</para>
</listitem>
<para>
This allows SRU version to be specified. If unset Pazpar2
will the default of YAZ (currently 1.2). Should be set
- to 1.1 or 1.2. For SOLR, the current supported/tested version is 1.4
+ to 1.1 or 1.2. For Solr, the current supported/tested version is 1.4 and 3.x.
</para>
</listitem>
</varlistentry>
</para>
</listitem>
</varlistentry>
-
<varlistentry>
<term>pz:block_timeout</term>
<listitem>
</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term>pz:termlist_term_count</term>
+ <listitem>
+ <para>
+ Specifies number of facet terms to be requested from the target.
+ The default is unspecified e.g. server-decided. Also see pz:facetmap.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>pz:termlist_term_factor</term>
+ <listitem>
+ <para>
+ Specifies whether to use a factor for pazpar2 generated facets (1) or not (0).
+ When mixing locallly generated (by the downloaded (pz:maxrecs) samples)
+ facet with native (target-generated) facets, the later will dominated the dominate the facet list
+ since they are generated based on the complete result set.
+ By scaling up the facet count using the ratio between total hit count and the sample size,
+ the total facet count can be approximated and thus better compared with native facets.
+ This is not enabled by default.
+ </para>
+ </listitem>
+ </varlistentry>
<varlistentry>
<term>pz:facetmap:<replaceable>name</replaceable></term>
</para>
<note>
<para>
- At this point only SOLR targets have been tested with this
+ At this point only Solr targets have been tested with this
facility.
</para>
</note>
by a field a metadata field (default is to use the name of the
limitmap itself).
</para>
+ <para>
+ For Pazpar2 version 1.6.23 and later the limitmap may include multiple
+ specifications, separated by <literal>,</literal> (comma).
+ For example:
+ <literal>ccl:title,local:ltitle,rpn:@attr 1=4</literal>.
+ </para>
<note>
<para>
The limitmap facility is supported for Pazpar2 version 1.6.0.