+
+ <chapter id="using">
+ <title>Using Pazpar2</title>
+ <para>
+ This chapter provides a general introduction to the use and
+ deployment of Pazpar2.
+ </para>
+
+ <section id="architecture">
+ <title>Pazpar2 and your systems architecture</title>
+ <para>
+ Pazpar2 is designed to provide asynchronous, behind-the-scenes
+ metasearching functionality to your application, exposing this
+ functionality using a simple webservice API that can be accessed
+ from any number of development environments. In particular, it is
+ possible to combine Pazpar2 either with your server-side dynamic
+ website scripting, with scripting or code running in the browser, or
+ with any combination of the two. Pazpar2 is an excellent tool for
+ building advanced, Ajax-based user interfaces for metasearch
+ functionality, but it isn't a requirement -- you can choose to use
+ Pazpar2 entirely as a backend to your regular server-side scripting.
+ When you do use Pazpar2 in conjunction
+ with browser scripting (JavaScript/Ajax, Flash, applets,
+ etc.), there are special considerations.
+ </para>
+
+ <para>
+ Pazpar2 implements a simple but efficient HTTP server, and it is
+ designed to interact directly with scripting running in the browser
+ for the best possible performance, and to limit overhead when
+ several browser clients generate numerous webservice requests.
+ However, it is still desirable to use a conventional webserver,
+ such as Apache, to serve up graphics, HTML documents, and
+ server-side scripting. Because the security sandbox environment of
+ most browser-side programming environments only allows communication
+ with the server from which the enclosing HTML page or object
+ originated, Pazpar2 is designed so that it can act as a transparent
+ proxy in front of an existing webserver (see <xref
+ linkend="pazpar2_conf"/> for details).
+ In this mode, all regular
+ HTTP requests are transparently passed through to your webserver,
+ while Pazpar2 only intercepts search-related webservice requests.
+ </para>
+
+ <para>
+ If you want to expose your combined service on port 80, you can
+ either run your regular webserver on a different port, a different
+ server, or a different IP address associated with the same server.
+ </para>
+
+ <para>
+ Pazpar2 can also work behind
+ a reverse Proxy. Refer to <xref linkend="installation.apache2proxy"/>)
+ for more information.
+ This allows your existing HTTP server to operate on port 80 as usual.
+ Pazpar2 can be started on another (internal) port.
+ </para>
+
+ <para>
+ Sometimes, it may be necessary to implement functionality on your
+ regular webserver that makes use of search results, for example to
+ implement data import functionality, emailing results, history
+ lists, personal citation lists, interlibrary loan functionality,
+ etc. Fortunately, it is simple to exchange information between
+ Pazpar2, your browser scripting, and backend server-side scripting.
+ You can send a session ID and possibly a record ID from your browser
+ code to your server code, and from there use Pazpar2s webservice API
+ to access result sets or individual records. You could even 'hide'
+ all of Pazpar2s functionality between your own API implemented on
+ the server-side, and access that from the browser or elsewhere. The
+ possibilities are just about endless.
+ </para>
+ </section>
+
+ <section id="data_model">
+ <title>Your data model</title>
+ <para>
+ Pazpar2 does not have a preconceived model of what makes up a data
+ model. There are no assumptions that records have specific fields or
+ that they are organized in any particular way. The only assumption
+ is that data comes packaged in a form that the software can work
+ with (presently, that means XML or MARC), and that you can provide
+ the necessary information to massage it into Pazpar2's internal
+ record abstraction.
+ </para>
+
+ <para>
+ Handling retrieval records in Pazpar2 is a two-step process. First,
+ you decide which data elements of the source record you are
+ interested in, and you specify any desired massaging or combining of
+ elements using an XSLT stylesheet (MARC records are automatically
+ normalized to <ulink url="&url.marcxml;">MARCXML</ulink> before this step).
+ If desired, you can run multiple XSLT stylesheets in series to accomplish
+ this, but the output of the last one should be a representation of the
+ record in a schema that Pazpar2 understands.
+ </para>
+
+ <para>
+ The intermediate, internal representation of the record looks like
+ this:
+ <screen><![CDATA[
+ <record xmlns="http://www.indexdata.com/pazpar2/1.0"
+ mergekey="title The Shining author King, Stephen">
+
+ <metadata type="title">The Shining</metadata>
+
+ <metadata type="author">King, Stephen</metadata>
+
+ <metadata type="kind">ebook</metadata>
+
+ <!-- ... and so on -->
+ </record>
+ ]]></screen>
+
+ As you can see, there isn't much to it. There are really only a few
+ important elements to this file.
+ </para>
+
+ <para>
+ Elements should belong to the namespace
+ <literal>http://www.indexdata.com/pazpar2/1.0</literal>.
+ If the root node contains the
+ attribute 'mergekey', then every record that generates the same
+ merge key (normalized for case differences, white space, and
+ truncation) will be joined into a cluster. In other words, you
+ decide how records are merged. If you don't include a merge key,
+ records are never merged. The 'metadata' elements provide the meat
+ of the elements -- the content. the 'type' attribute is used to
+ match each element against processing rules that determine what
+ happens to the data element next.
+ </para>
+
+ <para>
+ The next processing step is the extraction of metadata from the
+ intermediate representation of the record. This is governed by the
+ 'metadata' elements in the 'service' section of the configuration
+ file. See <xref linkend="config-server"/> for details. The metadata
+ in the retrieval record ultimately drives merging, sorting, ranking,
+ the extraction of browse facets, and display, all configurable.
+ </para>
+ </section>
+
+ <section id="client">
+ <title>Client development overview</title>
+ <para>
+ You can use Pazpar2 from any environment that allows you to use
+ webservices. The initial goal of the software was to support
+ Ajax-based applications, but there literally are no limits to what
+ you can do. You can use Pazpar2 from Javascript, Flash, Java, etc.,
+ on the browser side, and from any development environment on the
+ server side, and you can pass session tokens and record IDs freely
+ around between these environments to build sophisticated applications.
+ Use your imagination.
+ </para>
+
+ <para>
+ The webservice API of Pazpar2 is described in detail in <xref
+ linkend="pazpar2_protocol"/>.
+ </para>
+
+ <para>
+ In brief, you use the 'init' command to create a session, a
+ temporary workspace which carries information about the current
+ search. You start a new search using the 'search' command. Once the
+ search has been started, you can follow its progress using the
+ 'stat', 'bytarget', 'termlist', or 'show' commands. Detailed records
+ can be fetched using the 'record' command.
+ </para>
+ </section>
+
+ §-ajaxdev;
+
+ <section id="nonstandard">
+ <title>Connecting to non-standard resources</title>
+ <para>
+ Pazpar2 uses Z39.50 as its switchboard language -- i.e. as far as it
+ is concerned, all resources speak Z39.50, or its webservices derivatives,
+ SRU/SRW. It is, however, equipped
+ to handle a broad range of different server behavior, through
+ configurable query mapping and record normalization. If you develop
+ configuration, stylesheets, etc., for a new type of resources, we
+ encourage you to share your work. But you can also use Pazpar2 to
+ connect to hundreds of resources that do not support standard
+ protocols.
+ </para>
+
+ <para>
+ For a growing number of resources, Z39.50 is all you need. Over the
+ last few years, a number of commercial, full-text resources have
+ implemented Z39.50. These can be used through Pazpar2 with little or
+ no effort. Resources that use non-standard record formats will
+ require a bit of XSLT work, but that's all.
+ </para>
+
+ <para>
+ But what about resources that don't support Z39.50 at all? Some resources might
+ support OpenSearch, private, XML/HTTP-based protocols, or something
+ else entirely. Some databases exist only as web user interfaces and
+ will require screen-scraping. Still others exist only as static
+ files, or perhaps as databases supporting the OAI-PMH protocol.
+ There is hope! Read on.
+ </para>
+
+ <para>
+ Index Data continues to advocate the support of open standards. We
+ work with database vendors to support standards, so you don't have
+ to worry about programming against non-standard services. We also
+ provide tools (see <ulink
+ url="http://www.indexdata.com/simpleserver">SimpleServer</ulink>)
+ which make it comparatively easy to build gateways against servers
+ with non-standard behavior. Again, we encourage you to share any
+ work you do in this direction.
+ </para>
+
+ <para>
+ But the bottom line is that working with non-standard resources in
+ metasearching is really, really hard. If you want to build a
+ project with Pazpar2, and you need access to resources with
+ non-standard interfaces, we can help. We run gateways to more than
+ 2,000 popular, commercial databases and other resources,
+ making it simple
+ to plug them directly into Pazpar2. For a small annual fee per
+ database, we can help you establish connections to your licensed
+ resources. Meanwhile, you can help! If you build your own
+ standards-compliant gateways, host them for others, or share the
+ code! And tell your vendors that they can save everybody money and
+ increase the appeal of their resources by supporting standards.
+ </para>
+
+ <para>
+ There are those who will ask us why we are using Z39.50 as our
+ switchboard language rather than a different protocol. Basically,
+ we believe that Z39.50 is presently the most widely implemented
+ information retrieval protocol that has the level of functionality
+ required to support a good metasearching experience (structured
+ searching, structured, well-defined results). It is also compact and
+ efficient, and there is a very broad range of tools available to
+ implement it.
+ </para>
+ </section>
+
+ <section id="unicode">
+ <title>Unicode Compliance</title>
+ <para>
+ Pazpar2 is Unicode compliant and language and locale aware but relies
+ on character encoding for the targets to be specified correctly if
+ the targets themselves are not UTF-8 based (most aren't).
+ Just a few bad behaving targets can spoil the search experience
+ considerably if for example Greek, Russian or otherwise non 7-bit ASCII
+ search terms are entered. In these cases some targets return
+ records irrelevant to the query, and the result screens will be
+ cluttered with noise.
+ </para>
+ <para>
+ While noise from misbehaving targets can not be removed, it can
+ be reduced using truly Unicode based ranking. This is an
+ option which is available to the system administrator if ICU
+ support is compiled into Pazpar2, see
+ <xref linkend="installation"/> for details.
+ </para>
+ <para>
+ In addition, the ICU tokenization and normalization rules must
+ be defined in the master configuration file described in
+ <xref linkend="config-server"/>.
+ </para>
+ </section>
+
+ <section id="load_balancing">
+ <title>Load balancing</title>
+ <para>
+ Just like any web server, Pazpar2, can be load balanced by a standard hardware or software load balancer as long as the session stickiness is ensured. If you are already running the Apache2 web server in front of Pazpar2 and use the apache mod_proxy module to 'relay' client requests to Pazpar2, this set up can be easily extended to include load balancing capabilites. To do so you need to enable the <ulink url="http://httpd.apache.org/docs/2.2/mod/mod_proxy_balancer.html">
+ mod_proxy_balancer
+ </ulink> module in your Apache2 installation.
+ </para>
+
+ <para>
+ On a Debian based Apache 2 system, the relevant modules can
+ be enabled with:
+ <screen>
+ sudo a2enmod proxy_http
+ </screen>
+ </para>
+
+ <para>
+ The mod_proxy_balancer can pass all 'sessionsticky' requests to the same backend worker as long as the requests are marked with the originating worker's ID (called 'route'). If the Pazpar2 serverID is configured (by setting an 'id' attribute on the 'server' element in the Pazpar2 configuration file) Pazpar2 will append it to the 'session' element returned during the 'init' in a mod_proxy_balancer compatible manner. Since the 'session' is then re-sent by the client (for all pazpar2 request besides 'init'), the balancer can use the marker to pass the request to the right route. To do so the balancer needs to be configured to inspect the 'session' parameter.
+ </para>
+
+ <example id="load_balancing.example">
+ <title>Apache 2 load balancing configuration</title>