From: Marc Cromme Date: Thu, 6 Oct 2005 09:37:25 +0000 (+0000) Subject: Initial revision X-Git-Tag: first~1 X-Git-Url: http://lists.indexdata.dk/?a=commitdiff_plain;h=c64f3428802f61a7f087e410d9d0972f5a805f65;p=metaproxy-moved-to-github.git Initial revision --- c64f3428802f61a7f087e410d9d0972f5a805f65 diff --git a/.cvsignore b/.cvsignore new file mode 100644 index 0000000..d572015 --- /dev/null +++ b/.cvsignore @@ -0,0 +1,9 @@ +Makefile +Makefile.in +aclocal.m4 +config.cache +config.log +config.status +configure +libtool +autom4te.cache diff --git a/Doxyfile.in b/Doxyfile.in new file mode 100644 index 0000000..052549a --- /dev/null +++ b/Doxyfile.in @@ -0,0 +1,1153 @@ +# Doxyfile 1.3.8 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = YAZ + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @VERSION@ + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = dox + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of source +# files, where putting all generated files in the same directory would otherwise +# cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, +# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, +# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, +# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, +# Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is used +# as the annotated text. Otherwise, the brief description is used as-is. If left +# blank, the following values are used ("$name" is automatically replaced with the +# name of the entity): "The $name class" "The $name widget" "The $name file" +# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited +# members of a class in the documentation of that class as if those members were +# ordinary class members. Constructors, destructors and assignment operators of +# the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = src include + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp +# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories +# that are symbolic links (a Unix filesystem feature) are excluded from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_PREDEFINED tags. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. + +PREDEFINED = "YAZ_BEGIN_CDECL= " "YAZ_END_CDECL=" "YAZ_EXPORT=" + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = YAZ_BEGIN_CDECL YAZ_END_CDECL YAZ_EXPORT + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse the +# parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or +# super classes. Setting the tag to NO turns the diagrams off. Note that this +# option is superseded by the HAVE_DOT option below. This is only a fallback. It is +# recommended to install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found on the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 1024 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes that +# lay further from the root node will be omitted. Note that setting this option to +# 1 or 2 may greatly reduce the computation time needed for large code bases. Also +# note that a graph may be further truncated if the graph's image dimensions are +# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). +# If 0 is used for the depth value (the default), the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..16e47c8 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,16 @@ +AUTOMAKE_OPTIONS = foreign + +SUBDIRS = src include etc doc + +EXTRA_DIST= README LICENSE yazpp.m4 yaz.m4 usemarcon.m4 buildconf.sh + +dist-hook: + mkdir $(distdir)/win + cp $(srcdir)/win/makefile $(distdir)/win/ + mkdir $(distdir)/debian + cp $(srcdir)/debian/control $(distdir)/debian + cp $(srcdir)/debian/changelog $(distdir)/debian + cp $(srcdir)/debian/rules $(distdir)/debian + cp $(srcdir)/debian/postinst $(distdir)/debian + cp $(srcdir)/debian/compat $(distdir)/debian + cp $(srcdir)/debian/*.install $(distdir)/debian diff --git a/buildconf.sh b/buildconf.sh new file mode 100755 index 0000000..434e2f8 --- /dev/null +++ b/buildconf.sh @@ -0,0 +1,66 @@ +#!/bin/sh +# $Id: buildconf.sh,v 1.1 2005-10-06 09:37:25 marc Exp $ +set -x +aclocal -I . +libtoolize --automake --force +automake --add-missing +autoconf +set - +if [ -f config.cache ]; then + rm config.cache +fi + +enable_configure=false +enable_help=true +sh_flags="" +conf_flags="" +case $1 in + -d) + sh_flags="-g -Wall" + enable_configure=true + enable_help=false + shift + ;; + -c) + sh_flags="" + enable_configure=true + enable_help=false + shift + ;; +esac + +if $enable_configure; then + if test -n "$sh_flags"; then + CXXFLAGS="$sh_flags" ./configure $* + else + ./configure $* + fi +fi +if $enable_help; then + cat < +#include +#include +#include + +#include +#include + +#include "msg-thread.h" + +using namespace yazpp_1; + +IMsg_Thread::~IMsg_Thread() +{ + +} + +Msg_Thread_Queue::Msg_Thread_Queue() +{ + m_list = 0; +} + +int Msg_Thread_Queue::size() +{ + int no = 0; + Msg_Thread_Queue_List *l; + for (l = m_list; l; l = l->m_next) + no++; + return no; +} + +void Msg_Thread_Queue::enqueue(IMsg_Thread *m) +{ + Msg_Thread_Queue_List *l = new Msg_Thread_Queue_List; + l->m_next = m_list; + l->m_item = m; + m_list = l; +} + +IMsg_Thread *Msg_Thread_Queue::dequeue() +{ + Msg_Thread_Queue_List **l = &m_list; + if (!*l) + return 0; + while ((*l)->m_next) + l = &(*l)->m_next; + IMsg_Thread *m = (*l)->m_item; + delete *l; + *l = 0; + return m; +} + +static void *tfunc(void *p) +{ + Msg_Thread *pt = (Msg_Thread *) p; + pt->run(0); + return 0; +} + + +Msg_Thread::Msg_Thread(ISocketObservable *obs, int no_threads) + : m_SocketObservable(obs) +{ + pipe(m_fd); + obs->addObserver(m_fd[0], this); + obs->maskObserver(this, SOCKET_OBSERVE_READ); + + m_stop_flag = false; + pthread_mutex_init(&m_mutex_input_data, 0); + pthread_cond_init(&m_cond_input_data, 0); + pthread_mutex_init(&m_mutex_output_data, 0); + + m_no_threads = no_threads; + m_thread_id = new pthread_t[no_threads]; + int i; + for (i = 0; ideleteObserver(this); + + pthread_cond_destroy(&m_cond_input_data); + pthread_mutex_destroy(&m_mutex_input_data); + pthread_mutex_destroy(&m_mutex_output_data); + close(m_fd[0]); + close(m_fd[1]); +} + +void Msg_Thread::socketNotify(int event) +{ + if (event & SOCKET_OBSERVE_READ) + { + char buf[2]; + read(m_fd[0], buf, 1); + pthread_mutex_lock(&m_mutex_output_data); + IMsg_Thread *out = m_output.dequeue(); + pthread_mutex_unlock(&m_mutex_output_data); + if (out) + out->result(); + } +} + +void Msg_Thread::run(void *p) +{ + while(1) + { + pthread_mutex_lock(&m_mutex_input_data); + while (!m_stop_flag && m_input.size() == 0) + pthread_cond_wait(&m_cond_input_data, &m_mutex_input_data); + if (m_stop_flag) + { + pthread_mutex_unlock(&m_mutex_input_data); + break; + } + IMsg_Thread *in = m_input.dequeue(); + pthread_mutex_unlock(&m_mutex_input_data); + + IMsg_Thread *out = in->handle(); + pthread_mutex_lock(&m_mutex_output_data); + m_output.enqueue(out); + + write(m_fd[1], "", 1); + pthread_mutex_unlock(&m_mutex_output_data); + } +} + +void Msg_Thread::put(IMsg_Thread *m) +{ + pthread_mutex_lock(&m_mutex_input_data); + m_input.enqueue(m); + pthread_cond_signal(&m_cond_input_data); + pthread_mutex_unlock(&m_mutex_input_data); +} +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ + diff --git a/src/msg-thread.h b/src/msg-thread.h new file mode 100644 index 0000000..0218c3c --- /dev/null +++ b/src/msg-thread.h @@ -0,0 +1,85 @@ +/* $Id: msg-thread.h,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#include +#include +#include + +#if HAVE_DLFCN_H +#include +#endif + +#include +#include + +class IMsg_Thread { +public: + virtual IMsg_Thread *handle() = 0; + virtual void result() = 0; + virtual ~IMsg_Thread(); +}; + +class Msg_Thread_Queue_List { + friend class Msg_Thread_Queue; + private: + IMsg_Thread *m_item; + Msg_Thread_Queue_List *m_next; +}; + +class Msg_Thread_Queue { + public: + Msg_Thread_Queue(); + void enqueue(IMsg_Thread *in); + IMsg_Thread *dequeue(); + int size(); + private: + Msg_Thread_Queue_List *m_list; +}; + +class Msg_Thread : public yazpp_1::ISocketObserver { + public: + Msg_Thread(yazpp_1::ISocketObservable *obs, int no_threads); + virtual ~Msg_Thread(); + void socketNotify(int event); + void put(IMsg_Thread *m); + IMsg_Thread *get(); + void run(void *p); + int m_fd[2]; +private: + yazpp_1::ISocketObservable *m_SocketObservable; + int m_no_threads; + pthread_t *m_thread_id; + Msg_Thread_Queue m_input; + Msg_Thread_Queue m_output; + pthread_mutex_t m_mutex_input_data; + pthread_cond_t m_cond_input_data; + pthread_mutex_t m_mutex_output_data; + bool m_stop_flag; +}; + +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ + diff --git a/src/p2.cpp b/src/p2.cpp new file mode 100644 index 0000000..11f8716 --- /dev/null +++ b/src/p2.cpp @@ -0,0 +1,146 @@ +/* $Id: p2.cpp,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include "p2_config.h" +#include "p2_frontend.h" +#include "p2_xmlerror.h" +#include "p2_modules.h" + +using namespace yazpp_1; + +extern P2_ModuleEntry *p2_backend_dummy; + +/* + frontend result set map + resultset -> db,query + + backend result set map + db,query -> resultset, target + resultset, target +*/ +class P2_Frontend; + +P2_Config *P2_Server::lockConfig() +{ + pthread_mutex_lock(&m_mutex_config); + return m_config; +} + +void P2_Server::unlockConfig() +{ + pthread_mutex_unlock(&m_mutex_config); +} + +P2_Server::P2_Server(IPDU_Observable *the_PDU_Observable, + Msg_Thread *my_thread, + P2_Config *config, + P2_ModuleFactory *modules) + : Z_Assoc(the_PDU_Observable) +{ + m_my_thread = my_thread; + m_modules = modules; + m_config = config; + + pthread_mutex_init(&m_mutex_config, 0); + + yaz_log(YLOG_LOG, "Construct P2_Server=%p", this); +} + +IPDU_Observer *P2_Server::sessionNotify(IPDU_Observable + *the_PDU_Observable, int fd) +{ + P2_Frontend *my = new P2_Frontend(the_PDU_Observable, m_my_thread, this); + yaz_log(YLOG_LOG, "New session %s", the_PDU_Observable->getpeername()); + return my; +} + +P2_Server::~P2_Server() +{ + yaz_log(YLOG_LOG, "Destroy P2_server=%p", this); + pthread_mutex_destroy(&m_mutex_config); +} + +void P2_Server::recv_GDU(Z_GDU *apdu, int len) +{ +} + +void P2_Server::failNotify() +{ +} + +void P2_Server::timeoutNotify() +{ +} + +void P2_Server::connectNotify() +{ +} + +int main(int argc, char **argv) +{ + p2_xmlerror_setup(); + + P2_Config config; + + if (!config.parse_options(argc, argv)) + { + yaz_log(YLOG_FATAL, "Configuration incorrect. Exiting"); + exit(1); + } + + SocketManager mySocketManager; + + PDU_Assoc *my_PDU_Assoc = 0; + + Msg_Thread my_thread(&mySocketManager, config.m_no_threads); + + my_PDU_Assoc = new PDU_Assoc(&mySocketManager); + + P2_ModuleFactory modules; + + modules.add(p2_backend_dummy); + + std::list::const_iterator it; + for (it = config.m_modules.begin(); it != config.m_modules.end(); it++) + modules.add((*it)->m_fname.c_str()); + + P2_Server z(my_PDU_Assoc, &my_thread, &config, &modules); + z.server(config.m_listen_address.c_str()); + + while (mySocketManager.processEvent() > 0) + ; + return 0; +} +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ + diff --git a/src/p2_backend.h b/src/p2_backend.h new file mode 100644 index 0000000..b5864b3 --- /dev/null +++ b/src/p2_backend.h @@ -0,0 +1,31 @@ + +#ifndef P2_BACKEND_H +#define P2_BACKEND_H + +#include + +class IP2_BackendSet { +public: + virtual ~IP2_BackendSet(); + virtual int get(int start, int number) = 0; +}; + +class IP2_Backend { + public: + virtual ~IP2_Backend(); + virtual int search(yazpp_1::Yaz_Z_Query *q, IP2_BackendSet **rset, int *hits) = 0; +}; + +struct P2_ModuleInterface0 { + IP2_Backend *(*create)(const char *address); +}; + +struct P2_ModuleEntry { + int version; + const char *name; + const char *description; + void *interface_ptr; +}; + + +#endif diff --git a/src/p2_backend_dummy.cpp b/src/p2_backend_dummy.cpp new file mode 100644 index 0000000..79e8490 --- /dev/null +++ b/src/p2_backend_dummy.cpp @@ -0,0 +1,74 @@ + +#include +#include "p2_backend.h" + +class P2_BackendSetDummy : public IP2_BackendSet { +public: + P2_BackendSetDummy(); + ~P2_BackendSetDummy(); + int get(int start, int number); +}; + +class P2_BackendDummy : public IP2_Backend { +public: + P2_BackendDummy(const char *address); + ~P2_BackendDummy(); + int search(yazpp_1::Yaz_Z_Query *q, IP2_BackendSet **rset, int *hits); +}; + +P2_BackendDummy::P2_BackendDummy(const char *address) +{ + yaz_log(YLOG_LOG, "P2_backendDummy %p create", this); +} + +P2_BackendDummy::~P2_BackendDummy() +{ + yaz_log(YLOG_LOG, "P2_backendDummy %p destroy", this); +} + +int P2_BackendDummy::search(yazpp_1::Yaz_Z_Query *q, IP2_BackendSet **rset, + int *hits) +{ + yaz_log(YLOG_LOG, "P2_backendDummy %p search", this); + + P2_BackendSetDummy *s = new P2_BackendSetDummy(); + + *rset = s; + *hits = 42; + return 0; +} + +int P2_BackendSetDummy::get(int start, int number) +{ + yaz_log(YLOG_LOG, "P2_backendSetDummy %p get", this); + return 0; +} + +P2_BackendSetDummy::P2_BackendSetDummy() +{ + yaz_log(YLOG_LOG, "P2_backendSetDummy %p create", this); + +} + +P2_BackendSetDummy::~P2_BackendSetDummy() +{ + yaz_log(YLOG_LOG, "P2_backendSetDummy %p destroy", this); +} + +static IP2_Backend *dummy_create(const char *address) +{ + return new P2_BackendDummy(address); +} + +P2_ModuleInterface0 int0 = { + dummy_create +}; + +P2_ModuleEntry p2_module_entry = { + 0, + "dummy", + "Dummy Backend", + (void *) &int0 +}; + +P2_ModuleEntry *p2_backend_dummy = &p2_module_entry; diff --git a/src/p2_config.cpp b/src/p2_config.cpp new file mode 100644 index 0000000..6fd43f2 --- /dev/null +++ b/src/p2_config.cpp @@ -0,0 +1,383 @@ +/* $Id: p2_config.cpp,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include "p2_config.h" + +#if HAVE_XSLT +#include +#include +#include +#include +#include +#endif + +#include + +using namespace std; + +class P2_Config::Rep { + +public: + Rep(); + ~Rep(); +public: +#if HAVE_XSLT + xmlDocPtr m_docPtr; + xmlNodePtr m_proxyPtr; +#endif +}; + +P2_Config::Rep::Rep() +{ +#if HAVE_XSLT + m_docPtr = 0; + m_proxyPtr = 0; +#endif +} + +P2_Config::Rep::~Rep() +{ +#if HAVE_XSLT + if (m_docPtr) + xmlFreeDoc(m_docPtr); +#endif +} + +P2_Config::P2_Config() +{ + m_max_clients = 500; + m_client_idletime = 600; + m_debug_mode = 0; + m_no_limit_files = 0; + m_no_threads = 20; + m_target_idletime = 600; + + m_rep = new Rep(); +} + +bool P2_Config::parse_options(int argc, char **argv) +{ + char *arg; + int ret; + bool show_config = false; + while ((ret = options("o:a:t:v:c:u:i:m:l:T:p:n:h:XS", + argv, argc, &arg)) != -2) + { + switch (ret) + { + case 0: + if (m_listen_address.length()) + { + yaz_log(YLOG_FATAL, "Multiple listener address given"); + return false; + } + m_listen_address = arg; + break; + case 'a': + m_apdu_log = arg; + break; + case 'c': + if (m_xml_fname.length()) + { + yaz_log(YLOG_FATAL, "Multiple -c options given"); + return false; + } + if (!read_xml_config(arg)) + { + return false; + } + m_xml_fname = arg; + break; + case 'i': + m_client_idletime = atoi(arg); + break; + case 'l': + m_log_file = arg; + break; + case 'm': + m_max_clients = atoi(arg); + break; + case 'n': + m_no_limit_files = atoi(arg); + break; + case 'h': + m_no_threads = atoi(arg); + break; + case 'o': + m_optimize_flags = arg; + break; + case 'p': + if (m_pid_fname.length()) + { + yaz_log(YLOG_LOG, "Multiple -p options given"); + return false; + } + m_pid_fname = arg; + break; + case 't': + if (m_default_target.length()) + { + yaz_log(YLOG_LOG, "Multiple -t options given"); + return false; + } + m_default_target = arg; + break; + case 'T': + m_target_idletime = atoi(arg); + break; + case 'u': + if (m_uid.length()) + { + yaz_log(YLOG_FATAL, "-u specified more than once"); + return false; + } + m_uid = arg; + break; + case 'v': + yaz_log_init_level(yaz_log_mask_str(arg)); + break; + case 'X': + m_debug_mode = 1; + break; + case 'S': + show_config = true; + break; + default: + yaz_log(YLOG_FATAL, "Bad option %s", arg); + return false; + } + } + if (m_log_file.length()) + yaz_log_init_file(m_log_file.c_str()); + if (show_config) + print(); + return true; +} + +bool P2_Config::parse_xml_text(void *xml_ptr, bool &val) +{ + string v; + if (!parse_xml_text(xml_ptr, v)) + return false; + if (v.length() == 1 && v[0] == '1') + val = true; + else + val = false; + return true; +} + +bool P2_Config::parse_xml_text(void *xml_ptr, string &val) +{ + xmlNodePtr ptr = (xmlNodePtr) xml_ptr; + bool found = false; + string v; + for(ptr = ptr->children; ptr; ptr = ptr->next) + if (ptr->type == XML_TEXT_NODE) + { + xmlChar *t = ptr->content; + if (t) + { + v += (const char *) t; + found = true; + } + } + if (found) + val = v; + return found; +} + +void P2_Config::parse_xml_element_target(void *xml_ptr, + P2_ConfigTarget *t) +{ + xmlNodePtr ptr = (xmlNodePtr) xml_ptr; + + for (ptr = ptr->children; ptr; ptr = ptr->next) + { + if (ptr->type != XML_ELEMENT_NODE) + continue; + if (!strcmp((const char *) ptr->name, "url")) + { + parse_xml_text(ptr, t->m_target_address); + } + else if (!strcmp((const char *) ptr->name, "database")) + { + parse_xml_text(ptr, t->m_target_database); + } + else + { + yaz_log(YLOG_WARN, "Unknown element '%s' inside target", + (const char *) ptr->name); + m_errors++; + } + } +} + +void P2_Config::parse_xml_element_proxy(void *xml_ptr) +{ + xmlNodePtr ptr = (xmlNodePtr) xml_ptr; + + for (ptr = ptr->children; ptr; ptr = ptr->next) + { + if (ptr->type != XML_ELEMENT_NODE) + continue; + if (!strcmp((const char *) ptr->name, "target")) + { + P2_ConfigTarget *t = new P2_ConfigTarget(); + + struct _xmlAttr *attr; + for (attr = ptr->properties; attr; attr = attr->next) + if (!strcmp((const char *) attr->name, "name") + || !strcmp((const char *) attr->name, "host")) + { + parse_xml_text(attr, t->m_virt_address); + } + else if (!strcmp((const char *) attr->name, "database")) + { + parse_xml_text(attr, t->m_virt_database); + } + else if (!strcmp((const char *) attr->name, "default")) + { + parse_xml_text(attr, t->m_default); + } + else if (!strcmp((const char *) attr->name, "type")) + { + parse_xml_text(attr, t->m_type); + } + else + { + yaz_log(YLOG_WARN, "Unknown attribute '%s' for " + "element proxy", + (const char *) attr->name); + m_errors++; + } + parse_xml_element_target(ptr, t); + m_target_list.push_back(t); + } + else if (!strcmp((const char *) ptr->name, "max-clients")) + { + string v; + if (parse_xml_text(ptr, v)) + m_max_clients = atoi(v.c_str()); + } + else if (!strcmp((const char *) ptr->name, "module")) + { + P2_ConfigModule *t = new P2_ConfigModule(); + + string v; + if (parse_xml_text(ptr, v)) + { + t->m_fname = v; + m_modules.push_back(t); + } + } + else + { + yaz_log(YLOG_WARN, "Unknown element '%s' inside proxy", ptr->name); + m_errors++; + } + } +} + +void P2_Config::print() +{ + cout << "max_clients=" << m_max_clients << endl; + list::const_iterator it; + + for (it = m_target_list.begin(); it != m_target_list.end(); it++) + { + cout << "type=" << (*it)->m_type << " "; + cout << "v-address=" << (*it)->m_virt_address << " "; + cout << "v-db=" << (*it)->m_virt_database << " "; + cout << "t-address=" << (*it)->m_target_address << " "; + cout << "t-db=" << (*it)->m_target_database << " "; + cout << "default=" << (*it)->m_default << endl; + } +} + +bool P2_Config::read_xml_config(const char *fname) +{ + xmlDocPtr ndoc = xmlParseFile(fname); + + if (!ndoc) + { + yaz_log(YLOG_WARN, "Config file %s not found or parse error", fname); + return false; + } + int noSubstitutions = xmlXIncludeProcess(ndoc); + if (noSubstitutions == -1) + yaz_log(YLOG_WARN, "XInclude processing failed on config %s", fname); + + xmlNodePtr proxyPtr = xmlDocGetRootElement(ndoc); + if (!proxyPtr || proxyPtr->type != XML_ELEMENT_NODE || + strcmp((const char *) proxyPtr->name, "proxy")) + { + yaz_log(YLOG_WARN, "No proxy element in %s", fname); + xmlFreeDoc(ndoc); + return false; + } + m_rep->m_proxyPtr = proxyPtr; + + // OK: release previous and make it the current one. + if (m_rep->m_docPtr) + xmlFreeDoc(m_rep->m_docPtr); + m_rep->m_docPtr = ndoc; + + m_errors = 0; + parse_xml_element_proxy(proxyPtr); + if (m_errors && !m_debug_mode) + return false; + return true; +} + +P2_Config::~P2_Config() +{ + delete m_rep; +} + +P2_ConfigTarget::P2_ConfigTarget() +{ + m_default = false; +} + +P2_ConfigTarget *P2_Config::find_target(string db) +{ + list::const_iterator it; + for (it = m_target_list.begin(); it != m_target_list.end(); it++) + { + if ((*it)->m_virt_database == db) + return (*it); + } + return 0; +} + + +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ diff --git a/src/p2_config.h b/src/p2_config.h new file mode 100644 index 0000000..161e6e9 --- /dev/null +++ b/src/p2_config.h @@ -0,0 +1,90 @@ +/* $Id: p2_config.h,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#ifndef P2_CONFIG_INCLUDED +#define P2_CONFIG_INCLUDED + +#include +#include + +class P2_ConfigTarget { + public: + P2_ConfigTarget(); + std::string m_virt_address; + std::string m_virt_database; + std::string m_target_address; + std::string m_target_database; + std::string m_type; + bool m_default; +}; + +class P2_ConfigModule { + public: + std::string m_fname; +}; + +class P2_Config { + class Rep; + public: + P2_Config::P2_Config(); + P2_Config::~P2_Config(); + bool P2_Config::parse_options(int argc, char **argv); + P2_ConfigTarget *find_target(std::string db); + void print(); + private: + bool read_xml_config(const char *fname); + void parse_xml_element_proxy(void *xml_ptr); + void parse_xml_element_target(void *xml_ptr, + P2_ConfigTarget *t); + bool parse_xml_text(void *xml_ptr, std::string &val); + bool parse_xml_text(void *xml_ptr, bool &val); + public: + std::string m_apdu_log; + std::string m_default_target; + std::string m_listen_address; + std::string m_log_file; + std::string m_optimize_flags; + std::string m_pid_fname; + std::string m_uid; + std::string m_xml_fname; + + int m_max_clients; + int m_client_idletime; + int m_debug_mode; + int m_no_limit_files; + int m_no_threads; + int m_target_idletime; + + std::list m_target_list; + std::list m_modules; + private: + Rep *m_rep; + int m_errors; +}; + +#endif +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ diff --git a/src/p2_frontend.cpp b/src/p2_frontend.cpp new file mode 100644 index 0000000..faa602c --- /dev/null +++ b/src/p2_frontend.cpp @@ -0,0 +1,95 @@ +/* $Id: p2_frontend.cpp,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#include +#include +#include "p2_frontend.h" + +using namespace yazpp_1; +using namespace std; + +P2_Frontend::P2_Frontend(IPDU_Observable *the_PDU_Observable, + Msg_Thread *my_thread, P2_Server *server) + : Z_Assoc(the_PDU_Observable) +{ + m_my_thread = my_thread; + m_server = server; + m_no_requests = 0; + m_delete_flag = 0; + yaz_log(YLOG_LOG, "Construct P2_Frontend=%p", this); +} + + +IPDU_Observer *P2_Frontend::sessionNotify(IPDU_Observable + *the_PDU_Observable, int fd) +{ + return 0; +} + +P2_Frontend::~P2_Frontend() +{ + yaz_log(YLOG_LOG, "Destroy P2_Frontend=%p", this); + + list::iterator it; + + for (it = m_resultSets.begin(); it != m_resultSets.end(); it++) + { + delete *it; + *it = 0; + } +} + +void P2_Frontend::recv_GDU(Z_GDU *z_pdu, int len) +{ + GDU *gdu = new GDU(z_pdu); + + P2_Msg *m = new P2_Msg(gdu, this, m_server); + m_no_requests++; + m_my_thread->put(m); +} + +void P2_Frontend::failNotify() +{ + m_delete_flag = 1; + if (m_no_requests == 0) + delete this; + +} + +void P2_Frontend::timeoutNotify() +{ + m_delete_flag = 1; + if (m_no_requests == 0) + delete this; +} + +void P2_Frontend::connectNotify() +{ + +} + +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ diff --git a/src/p2_frontend.h b/src/p2_frontend.h new file mode 100644 index 0000000..1c60373 --- /dev/null +++ b/src/p2_frontend.h @@ -0,0 +1,163 @@ +/* $Id: p2_frontend.h,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#ifndef P2_FRONTEND_H +#define P2_FRONTEND_H + +#include +#include +#include + +#include "msg-thread.h" +#include +#include +#include +#include + +class P2_Frontend; +class P2_Server; +class P2_Config; +class P2_ConfigTarget; +class P2_ModuleFactory; + +class IP2_BackendSet; + +class P2_BackendResultSet { + public: + P2_BackendResultSet(); + ~P2_BackendResultSet(); + yazpp_1::Yaz_Z_Query m_query; + std::list m_db_list; + int m_hit_count; + IP2_BackendSet *m_int; + // record cache here +}; + +class IP2_Backend; + +class P2_Backend { + public: + P2_Backend(P2_ConfigTarget *cfg, IP2_Backend *backend_interface); + ~P2_Backend(); + public: + std::listm_resultSets; + P2_ConfigTarget *m_configTarget; + bool m_busy; + IP2_Backend *m_int; +}; + +class P2_Server : public yazpp_1::Z_Assoc { +public: + ~P2_Server(); + P2_Server(yazpp_1::IPDU_Observable *the_PDU_Observable, + Msg_Thread *m_my_thread, + P2_Config *config, + P2_ModuleFactory *modules); + P2_Config *lockConfig(); + void unlockConfig(); + std::listm_backend_list; + P2_ModuleFactory *m_modules; +private: + yazpp_1::IPDU_Observer* sessionNotify( + yazpp_1::IPDU_Observable *the_PDU_Observable, + int fd); + void recv_GDU(Z_GDU *apdu, int len); + + void failNotify(); + void timeoutNotify(); + void connectNotify(); +private: + P2_Config *m_config; + Msg_Thread *m_my_thread; + pthread_mutex_t m_mutex_config; +}; + +class P2_FrontResultSet { +public: + P2_FrontResultSet(const char *id); + ~P2_FrontResultSet(); + void setQuery(Z_Query *z_query); + void setDatabases(char **db, int num); + std::string m_resultSetId; + std::vector m_db_list; + yazpp_1::Yaz_Z_Query m_query; +}; + +class P2_Msg : public IMsg_Thread { +public: + int m_close_flag; + yazpp_1::GDU *m_gdu; + yazpp_1::GDU *m_output; + P2_Frontend *m_front; + P2_Server *m_server; + IMsg_Thread *handle(); + void result(); + P2_Msg(yazpp_1::GDU *gdu, P2_Frontend *front, P2_Server *server); + virtual ~P2_Msg(); + private: + + Z_APDU *frontend_search_resultset(Z_APDU *z_gdu, ODR odr, + P2_FrontResultSet **rset); + Z_APDU *frontend_present_resultset(Z_APDU *z_gdu, ODR odr, + P2_FrontResultSet **rset); + Z_APDU *frontend_search_apdu(Z_APDU *z_gdu, ODR odr); + Z_APDU *frontend_present_apdu(Z_APDU *z_gdu, ODR odr); + P2_Backend *select_backend(std::string db, + yazpp_1::Yaz_Z_Query *query, + P2_BackendResultSet **bset); + P2_Backend *create_backend(std::string db); +}; + +class P2_Frontend : public yazpp_1::Z_Assoc { + public: + ~P2_Frontend(); + P2_Frontend(yazpp_1::IPDU_Observable *the_PDU_Observable, + Msg_Thread *m_my_thread, P2_Server *server); + IPDU_Observer* sessionNotify(yazpp_1::IPDU_Observable *the_PDU_Observable, + int fd); + + void recv_GDU(Z_GDU *apdu, int len); + + void failNotify(); + void timeoutNotify(); + void connectNotify(); + + int m_no_requests; + int m_delete_flag; + std::list m_resultSets; + + private: + yazpp_1::GDUQueue m_in_queue; + Msg_Thread *m_my_thread; + P2_Server *m_server; + private: + bool P2_Frontend::search(Z_GDU *z_gdu); + bool P2_Frontend::handle_init(Z_GDU *z_gdu); +}; + +#endif +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ diff --git a/src/p2_modules.cpp b/src/p2_modules.cpp new file mode 100644 index 0000000..6f1778b --- /dev/null +++ b/src/p2_modules.cpp @@ -0,0 +1,77 @@ + +#include + +#include "p2_modules.h" + +class P2_ModuleDLEntry { +public: + void *m_dl_handle; + P2_ModuleEntry *m_entry; + P2_ModuleDLEntry(); + ~P2_ModuleDLEntry(); +}; + +P2_ModuleDLEntry::P2_ModuleDLEntry() +{ + m_dl_handle = 0; + m_entry = 0; +} + +P2_ModuleDLEntry::~P2_ModuleDLEntry() +{ + if (m_dl_handle) + dlclose(m_dl_handle); +} + +P2_ModuleFactory::P2_ModuleFactory() +{ +} + +P2_ModuleFactory::~P2_ModuleFactory() +{ +} + +bool P2_ModuleFactory::add(P2_ModuleEntry *entry) +{ + P2_ModuleDLEntry *m = new P2_ModuleDLEntry(); + m->m_entry = entry; + m_modules.push_back(m); + return true; +} + +bool P2_ModuleFactory::add(const char *fname) +{ + void *dl_handle = dlopen(fname, RTLD_NOW|RTLD_GLOBAL); + if (!dl_handle) + return false; + + P2_ModuleEntry *entry = + reinterpret_cast + (dlsym(dl_handle, "p2_module_entry")); + if (!entry) + { + dlclose(dl_handle); + return false; + } + P2_ModuleDLEntry *m = new P2_ModuleDLEntry(); + m->m_dl_handle = dl_handle; + m->m_entry = entry; + m_modules.push_back(m); + return true; +} + +void *P2_ModuleFactory::get_interface(const char *name, int version) +{ + std::list::const_iterator it; + for (it = m_modules.begin(); it != m_modules.end(); it++) + { + P2_ModuleDLEntry *ent = *it; + if (!strcmp(ent->m_entry->name, name) && + ent->m_entry->version == version) + { + return ent->m_entry->interface_ptr; + } + } + return 0; +} + diff --git a/src/p2_modules.h b/src/p2_modules.h new file mode 100644 index 0000000..c3f0e1b --- /dev/null +++ b/src/p2_modules.h @@ -0,0 +1,21 @@ + +#ifndef P2_MODULES_H +#define P2_MODULES_H + +#include "p2_backend.h" + +#include + +class P2_ModuleDLEntry ; +class P2_ModuleFactory { + public: + P2_ModuleFactory(); + ~P2_ModuleFactory(); + bool add(const char *fname); + bool add(P2_ModuleEntry *entry); + void *get_interface(const char *name, int version); + private: + std::list m_modules; +}; + +#endif diff --git a/src/p2_msg.cpp b/src/p2_msg.cpp new file mode 100644 index 0000000..ae2177f --- /dev/null +++ b/src/p2_msg.cpp @@ -0,0 +1,387 @@ +/* $Id: p2_msg.cpp,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#include +#include +#include "p2_backend.h" +#include "p2_frontend.h" +#include "p2_config.h" +#include "p2_modules.h" + +using namespace yazpp_1; +using namespace std; + +IP2_BackendSet::~IP2_BackendSet() +{ +} + +IP2_Backend::~IP2_Backend() +{ + +} + +P2_Backend::P2_Backend(P2_ConfigTarget *cfg, IP2_Backend *backend_int) +{ + m_configTarget = new P2_ConfigTarget; + *m_configTarget = *cfg; + m_busy = false; + m_int = backend_int; +} + +P2_Backend::~P2_Backend() +{ + delete m_configTarget; +} + +P2_BackendResultSet::P2_BackendResultSet() +{ + m_int = 0; +} + +P2_BackendResultSet::~P2_BackendResultSet() +{ + delete m_int; +} + +P2_Backend *P2_Msg::select_backend(string db, + Yaz_Z_Query *query, + P2_BackendResultSet **bset) +{ + P2_Config *cfg = m_server->lockConfig(); + + // see if some target has done this query before + + *bset = 0; + P2_Backend *backend = 0; + + list::const_iterator it; + for (it = m_server->m_backend_list.begin(); + it != m_server->m_backend_list.end(); it++) + { + if ((*it)->m_busy) + continue; + + if (db != (*it)->m_configTarget->m_virt_database) + continue; + backend = *it; + + if (query) + { + list::const_iterator is; + for (is = (*it)->m_resultSets.begin(); + is != (*it)->m_resultSets.end(); is++) + { + if (query->match(&(*is)->m_query)) + { + *bset = *is; + break; + } + } + } + if (bset) + break; + } + if (!backend) + { + P2_ConfigTarget *target_cfg = cfg->find_target(db); + + if (!target_cfg) + { + yaz_log(YLOG_WARN, "No backend for database %s", + db.c_str()); + } + else + { + P2_ModuleInterface0 *int0 = + reinterpret_cast + (m_server->m_modules->get_interface(target_cfg->m_type.c_str(), + 0)); + IP2_Backend *bint = 0; + + if (int0) + bint = int0->create(target_cfg->m_target_address.c_str()); + + if (bint) + backend = new P2_Backend(target_cfg, bint); + + if (backend) + m_server->m_backend_list.push_back(backend); + } + } + if (backend) + backend->m_busy = true; + m_server->unlockConfig(); + return backend; +} + +void P2_FrontResultSet::setQuery(Z_Query *z_query) +{ + m_query.set_Z_Query(z_query); +} + +void P2_FrontResultSet::setDatabases(char **db, int num) +{ + m_db_list.clear(); + + int i; + for (i = 0; iu.searchRequest; + list::iterator it; + P2_FrontResultSet *s = 0; + + string id = req->resultSetName; + for (it = m_front->m_resultSets.begin(); it != m_front->m_resultSets.end(); it++) + { + if ((*it)->m_resultSetId == id) + { + s = *it; + break; + } + } + if (s) + { + // result set already exists + *rset = s; + if (req->replaceIndicator && *req->replaceIndicator) + { // replace indicator true + s->setQuery(req->query); + s->setDatabases(req->databaseNames, req->num_databaseNames); + return 0; + } + Z_APDU *apdu = zget_APDU(odr, Z_APDU_searchResponse); + Z_Records *rec = (Z_Records *) odr_malloc(odr, sizeof(Z_Records)); + apdu->u.searchResponse->records = rec; + rec->which = Z_Records_NSD; + rec->u.nonSurrogateDiagnostic = + zget_DefaultDiagFormat( + odr, YAZ_BIB1_RESULT_SET_EXISTS_AND_REPLACE_INDICATOR_OFF, + req->resultSetName); + + return apdu; + } + // does not exist + s = new P2_FrontResultSet(req->resultSetName); + s->setQuery(req->query); + s->setDatabases(req->databaseNames, req->num_databaseNames); + m_front->m_resultSets.push_back(s); + *rset = s; + return 0; +} + +Z_APDU *P2_Msg::frontend_search_apdu(Z_APDU *request_apdu, ODR odr) +{ + P2_FrontResultSet *rset; + Z_APDU *response_apdu = frontend_search_resultset(request_apdu, odr, + &rset); + if (response_apdu) + return response_apdu; + + // no immediate error (yet) + size_t i; + for (i = 0; im_db_list.size(); i++) + { + string db = rset->m_db_list[i]; + P2_BackendResultSet *bset; + P2_Backend *b = select_backend(db, &rset->m_query, &bset); + if (!b) + { + Z_APDU *apdu = zget_APDU(odr, Z_APDU_searchResponse); + Z_Records *rec = (Z_Records *) odr_malloc(odr, sizeof(Z_Records)); + apdu->u.searchResponse->records = rec; + rec->which = Z_Records_NSD; + rec->u.nonSurrogateDiagnostic = + zget_DefaultDiagFormat( + odr, YAZ_BIB1_DATABASE_UNAVAILABLE, db.c_str()); + return apdu; + } + if (!bset) + { // new set + bset = new P2_BackendResultSet(); + + bset->m_query.set_Z_Query(request_apdu->u.searchRequest->query); + bset->m_db_list.push_back(db); + + b->m_int->search(&bset->m_query, &bset->m_int, &bset->m_hit_count); + b->m_resultSets.push_back(bset); + } + else + { + bset->m_int->get(1, 1); + } + response_apdu = zget_APDU(odr, Z_APDU_searchResponse); + *response_apdu->u.searchResponse->resultCount = bset->m_hit_count; + b->m_busy = false; + } + if (!response_apdu) + { + Z_APDU *apdu = zget_APDU(odr, Z_APDU_searchResponse); + Z_Records *rec = (Z_Records *) odr_malloc(odr, sizeof(Z_Records)); + apdu->u.searchResponse->records = rec; + rec->which = Z_Records_NSD; + rec->u.nonSurrogateDiagnostic = + zget_DefaultDiagFormat(odr, YAZ_BIB1_UNSUPP_SEARCH, 0); + return apdu; + } + return response_apdu; +} + +Z_APDU *P2_Msg::frontend_present_resultset(Z_APDU *z_gdu, ODR odr, + P2_FrontResultSet **rset) +{ + Z_PresentRequest *req = z_gdu->u.presentRequest; + list::iterator it; + P2_FrontResultSet *s = 0; + + string id = req->resultSetId; + for (it = m_front->m_resultSets.begin(); it != m_front->m_resultSets.end(); it++) + { + if ((*it)->m_resultSetId == id) + { + s = *it; + break; + } + } + *rset = s; + if (s) + return 0; // fine result set exists + + Z_APDU *apdu = zget_APDU(odr, Z_APDU_presentResponse); + + Z_Records *rec = (Z_Records *) odr_malloc(odr, sizeof(Z_Records)); + apdu->u.presentResponse->records = rec; + rec->which = Z_Records_NSD; + rec->u.nonSurrogateDiagnostic = + zget_DefaultDiagFormat( + odr, + YAZ_BIB1_SPECIFIED_RESULT_SET_DOES_NOT_EXIST, + req->resultSetId); + return apdu; +} + +Z_APDU *P2_Msg::frontend_present_apdu(Z_APDU *request_apdu, ODR odr) +{ + P2_FrontResultSet *rset; + Z_APDU *response_apdu = frontend_present_resultset(request_apdu, odr, + &rset); + if (response_apdu) + return response_apdu; + return zget_APDU(odr, Z_APDU_presentResponse); +} + +IMsg_Thread *P2_Msg::handle() +{ + ODR odr = odr_createmem(ODR_ENCODE); + yaz_log(YLOG_LOG, "P2_Msg:handle begin"); + Z_GDU *request_gdu = m_gdu->get(); + + if (request_gdu->which == Z_GDU_Z3950) + { + Z_APDU *request_apdu = request_gdu->u.z3950; + Z_APDU *response_apdu = 0; + switch(request_apdu->which) + { + case Z_APDU_initRequest: + response_apdu = zget_APDU(odr, Z_APDU_initResponse); + ODR_MASK_SET(response_apdu->u.initResponse->options, Z_Options_triggerResourceCtrl); + ODR_MASK_SET(response_apdu->u.initResponse->options, Z_Options_search); + ODR_MASK_SET(response_apdu->u.initResponse->options, Z_Options_present); + ODR_MASK_SET(response_apdu->u.initResponse->options, Z_Options_namedResultSets); + break; + case Z_APDU_searchRequest: + response_apdu = frontend_search_apdu(request_apdu, odr); + break; + case Z_APDU_presentRequest: + response_apdu = frontend_present_apdu(request_apdu, odr); + break; + case Z_APDU_triggerResourceControlRequest: + break; + default: + response_apdu = zget_APDU(odr, Z_APDU_close); + m_close_flag = 1; + break; + } + if (response_apdu) + m_output = new GDU(response_apdu); + } + yaz_log(YLOG_LOG, "P2_Msg:handle end"); + odr_destroy(odr); + return this; +} + +void P2_Msg::result() +{ + m_front->m_no_requests--; + if (!m_front->m_delete_flag) + { + if (m_output) + { + int len; + m_front->send_GDU(m_output->get(), &len); + } + if (m_close_flag) + { + m_front->close(); + m_front->m_delete_flag = 1; + } + } + if (m_front->m_delete_flag && m_front->m_no_requests == 0) + delete m_front; + delete this; +} + +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ diff --git a/src/p2_xmlerror.cpp b/src/p2_xmlerror.cpp new file mode 100644 index 0000000..c0d9f90 --- /dev/null +++ b/src/p2_xmlerror.cpp @@ -0,0 +1,70 @@ +/* $Id: p2_xmlerror.cpp,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#include +#include +#include + +#include "p2_xmlerror.h" + +#if HAVE_XSLT +#include +#include +#endif + +#if HAVE_XSLT +static void p2_xml_error_handler(void *ctx, const char *fmt, ...) +{ + char buf[1024]; + size_t sz; + + va_list ap; + va_start(ap, fmt); + +#ifdef WIN32 + vsprintf(buf, fmt, ap); +#else + vsnprintf(buf, sizeof(buf), fmt, ap); +#endif + sz = strlen(buf); + if (sz > 0 && buf[sz-1] == '\n') + buf[sz-1] = '\0'; + + yaz_log(YLOG_WARN, "%s: %s", (char*) ctx, buf); + + va_end (ap); +} +#endif + +void p2_xmlerror_setup() +{ +#if HAVE_XSLT + xmlSetGenericErrorFunc((void *) "XML", p2_xml_error_handler); + xsltSetGenericErrorFunc((void *) "XSLT", p2_xml_error_handler); +#endif +} +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ diff --git a/src/p2_xmlerror.h b/src/p2_xmlerror.h new file mode 100644 index 0000000..f8eb1e5 --- /dev/null +++ b/src/p2_xmlerror.h @@ -0,0 +1,35 @@ +/* $Id: p2_xmlerror.h,v 1.1 2005-10-06 09:37:25 marc Exp $ + Copyright (c) 1998-2005, Index Data. + +This file is part of the yaz-proxy. + +YAZ proxy is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +YAZ proxy is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with YAZ proxy; see the file LICENSE. If not, write to the +Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + */ + +#ifndef P2_XMLERROR_H +#define P2_XMLERROR_H + +void p2_xmlerror_setup(); + +#endif + +/* + * Local variables: + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + * vim: shiftwidth=4 tabstop=8 expandtab + */ diff --git a/src/p3_filter.h b/src/p3_filter.h new file mode 100644 index 0000000..bb6f5b1 --- /dev/null +++ b/src/p3_filter.h @@ -0,0 +1,147 @@ + +#ifndef P3_FILTER_H +#define P3_FILTER_H + +#include + + +namespace p3 { + + class Package; + + + + class Filter { + public: + virtual ~Filter(){}; + virtual Package & process(Package & package) const { + return package; + }; + virtual void configure(){}; + + // set/get the C++ way .. just as showoff + + // get function - returns copy and keeps object const, + // thus is right val in assignment + unsigned int max_front_workers() const { + return m_max_front; + } + // set function - returns reference and changes object, + // thus is left val in assignment + unsigned int & max_front_workers() { + return m_max_front; + } + // more traditional set function, taking const reference + // or copy (here const ref for demo), returning ref to object + // can be chained with other similar functions! + Filter & max_front_workers(const unsigned int & max_front){ + m_max_front = max_front; + return *this; + } + + private: + unsigned int m_max_front; + }; + + + class Filter_Exception : public std::runtime_error { + public: + Filter_Exception(const std::string message) + : std::runtime_error("Filter_Exception: " + message){ + }; + }; + + + class Router { + public: + virtual ~Router(){}; + virtual const Filter & + route(const Filter & filter, Package & package) const { + //if (!m_sillyrule) + //throw Router_Exception("no routing rules known"); + return m_sillyrule; + }; + virtual void configure(){}; + Router & rule(Filter filter){ + m_sillyrule = filter; + return *this; + } + private: + Filter m_sillyrule; + }; + + + class Router_Exception : public std::runtime_error { + public: + Router_Exception(const std::string message) + : std::runtime_error("Router_Exception: " + message){}; + }; + + + class Package { + public: + + // send package to it's next filter defined in chain + void move() { + Filter oldfilter; + Filter nextfilter = m_router.route(oldfilter, *this); + nextfilter.process(*this); + } + + + // get function - returns copy and keeps object const, + // thus is right val in assignment + unsigned int data() const { + return m_data; + } + // set function - returns reference and changes object, + // thus is left val in assignment + unsigned int & data() { + return m_data; + } + + // more traditional set function, taking const reference + // or copy (here const ref for demo), returning ref to object + // can be chained with other similar functions! + Package & data(const unsigned int & data){ + m_data = data; + return *this; + } + + // get function - returns copy and keeps object const, + // thus is right val in assignment + Router router() const { + return m_router; + } + // set function - returns reference and changes object, + // thus is left val in assignment + Router & router() { + return m_router; + } + // more traditional set function, taking const reference + // or copy (here const ref for demo), returning ref to object + // can be chained with other similar functions! + Package & router(const Router & router){ + m_router = router; + return *this; + } + + private: + unsigned int m_data; + Router m_router; + }; + + + class Package_Exception : public std::runtime_error { + public: + Package_Exception(const std::string message) + : std::runtime_error("Package_Exception: " + message){ + }; + }; + + + + +} + +#endif diff --git a/src/p3_main.cpp b/src/p3_main.cpp new file mode 100644 index 0000000..ee4c4a2 --- /dev/null +++ b/src/p3_main.cpp @@ -0,0 +1,69 @@ + +#include +#include "p3_filter.h" + + + +int main(int argc, char **argv) { + + // test filter set/get/exception + try { + std::cout << "\nTRY" << "\n"; + p3::Filter filter; + unsigned int tmp; + + filter.max_front_workers(1).max_front_workers(2); + tmp = filter.max_front_workers(); + std::cout << "workers: " << tmp << "\n"; + + filter.max_front_workers() = 3; + tmp = filter.max_front_workers(); + std::cout << "workers: " << tmp << "\n"; + + throw p3::Filter_Exception("finished"); + } + catch (std::exception &e) { + std::cout << e.what() << "\n"; + } + + + try { + std::cout << "\nTRY" << "\n"; + + p3::Filter filter1; + p3::Filter filter2; + + std::cout << "filter1 filter2" << "\n"; + + p3::Router router1; + router1.rule(filter1); + std::cout << "router1.rule(filter1)" << "\n"; + + p3::Router router2; + router2.rule(filter2); + std::cout << "router2.rule(filter2)" << "\n"; + + p3::Package pack_in; + pack_in.data(7).router(router1); + std::cout << "pack_in.data(7).router(router1)" << "\n"; + + pack_in.move(); + std::cout << "pack_in.move()" << "\n"; + + pack_in.router(router2); + std::cout << "pack_in.router(router2)" << "\n"; + + pack_in.move(); + std::cout << "pack_in.move()" << "\n"; + + throw p3::Router_Exception("finished"); + + } + catch (std::exception &e) { + std::cout << e.what() << "\n"; + } + + + +} + diff --git a/usemarcon.m4 b/usemarcon.m4 new file mode 100644 index 0000000..c52fe0c --- /dev/null +++ b/usemarcon.m4 @@ -0,0 +1,42 @@ +## $Id: usemarcon.m4,v 1.1 2005-10-06 09:37:25 marc Exp $ +AC_DEFUN([USEMARCON_INIT], +[ + AC_SUBST(USEMARCONLALIB) + AC_SUBST(USEMARCONINC) + usemarconconfig=NONE + usemarconpath=NONE + AC_ARG_WITH(usemarcon, [ --with-usemarcon=DIR usemarcon-config in DIR (example /home/usemarcon145)], [usemarconpath=$withval]) + + if test "x$usemarconpath" != "xNONE"; then + usemarconconfig=$usemarconpath/usemarcon-config + else + if test "x$srcdir" = "x"; then + usemarconsrcdir=. + else + usemarconsrcdir=$srcdir + fi + for i in ${usemarconsrcdir}/../usemarcon*; do + if test -d $i; then + if test -r $i/usemarcon-config; then + usemarconconfig=$i/usemarcon-config + fi + fi + done + if test "x$usemarconconfig" = "xNONE"; then + AC_PATH_PROG(usemarconconfig, usemarcon-config, NONE) + fi + fi + + AC_MSG_CHECKING(for USEMARCON) + if $usemarconconfig --version >/dev/null 2>&1; then + USEMARCONLALIB=`$usemarconconfig --lalibs $1` + USEMARCONINC=`$usemarconconfig --cflags $1` + USEMARCONVERSION=`$usemarconconfig --version` + AC_MSG_RESULT($usemarconconfig) + AC_DEFINE(HAVE_USEMARCON) + else + AC_MSG_RESULT(Not found) + USEMARCONVERSION=NONE + fi +]) + diff --git a/yaz.m4 b/yaz.m4 new file mode 100644 index 0000000..2782a1d --- /dev/null +++ b/yaz.m4 @@ -0,0 +1,137 @@ +# Use this m4 function for autoconf if you use YAZ in your own +# configure script. + +dnl ----- Setup Docbook documentation for YAZ +AC_DEFUN([YAZ_DOC], +[ +AC_SUBST(DTD_DIR) +AC_ARG_WITH(docbook-dtd,[[ --with-docbook-dtd=DIR use docbookx.dtd in DIR]], +[ + if test -f "$withval/docbookx.dtd"; then + DTD_DIR=$withval + fi +],[ + AC_MSG_CHECKING(for docbookx.dtd) + DTD_DIR="" + for d in /usr/lib/sgml/dtd/docbook-xml \ + /usr/share/sgml/docbook/dtd/4.2 \ + /usr/share/sgml/docbook/dtd/xml/4.* \ + /usr/share/sgml/docbook/xml-dtd-4.* + do + if test -f $d/docbookx.dtd; then + DTD_DIR=$d + fi + done + if test -z "$DTD_DIR"; then + AC_MSG_RESULT(Not found) + else + AC_MSG_RESULT($d) + fi +]) +AC_SUBST(DSSSL_DIR) +AC_ARG_WITH(docbook-dsssl,[[ --with-docbook-dsssl=DIR use Docbook DSSSL in DIR/{html,print}/docbook.dsl]], +[ + if test -f "$withval/html/docbook.dsl"; then + DSSSL_DIR=$withval + fi +],[ + AC_MSG_CHECKING(for docbook.dsl) + DSSSL_DIR="" + for d in /usr/share/sgml/docbook/stylesheet/dsssl/modular \ + /usr/share/sgml/docbook/dsssl-stylesheets-1.* \ + /usr/lib/sgml/stylesheet/dsssl/docbook/nwalsh + do + if test -f $d/html/docbook.dsl; then + AC_MSG_RESULT($d) + DSSSL_DIR=$d + break + fi + done + if test -z "$DSSSL_DIR"; then + AC_MSG_RESULT(Not found) + fi +]) +AC_SUBST(XSL_DIR) +AC_ARG_WITH(docbook-xsl,[[ --with-docbook-xsl=DIR use Docbook XSL in DIR/{htmlhelp,xhtml}]], +[ + if test -f "$withval/htmlhelp/htmlhelp.xsl"; then + XSL_DIR=$withval + fi +],[ + AC_MSG_CHECKING(for htmlhelp.xsl) + for d in /usr/share/sgml/docbook/stylesheet/xsl/nwalsh \ + /usr/share/sgml/docbook/xsl-stylesheets-1.* + do + if test -f $d/htmlhelp/htmlhelp.xsl; then + AC_MSG_RESULT($d) + XSL_DIR=$d + break + fi + done + if test -z "$XSL_DIR"; then + AC_MSG_RESULT(Not found) + fi +]) +]) + +AC_DEFUN([YAZ_INIT], +[ + AC_SUBST(YAZLIB) + AC_SUBST(YAZLALIB) + AC_SUBST(YAZINC) + AC_SUBST(YAZVERSION) + yazconfig=NONE + yazpath=NONE + AC_ARG_WITH(yaz, [ --with-yaz=DIR use yaz-config in DIR (example /home/yaz-1.7)], [yazpath=$withval]) + if test "x$yazpath" != "xNONE"; then + yazconfig=$yazpath/yaz-config + else + if test "x$srcdir" = "x"; then + yazsrcdir=. + else + yazsrcdir=$srcdir + fi + for i in ${yazsrcdir}/../../yaz ${yazsrcdir}/../yaz* ${yazsrcdir}/../yaz; do + if test -d $i; then + if test -r $i/yaz-config; then + yazconfig=$i/yaz-config + fi + fi + done + if test "x$yazconfig" = "xNONE"; then + AC_PATH_PROG(yazconfig, yaz-config, NONE) + fi + fi + AC_MSG_CHECKING(for YAZ) + if $yazconfig --version >/dev/null 2>&1; then + YAZLIB=`$yazconfig --libs $1` + # if this is empty, it's a simple version YAZ 1.6 script + # so we have to source it instead... + if test "X$YAZLIB" = "X"; then + . $yazconfig + else + YAZLALIB=`$yazconfig --lalibs $1` + YAZINC=`$yazconfig --cflags $1` + YAZVERSION=`$yazconfig --version` + fi + AC_MSG_RESULT([$yazconfig]) + else + AC_MSG_RESULT(Not found) + YAZVERSION=NONE + fi + if test "X$YAZVERSION" != "XNONE"; then + AC_MSG_CHECKING([for YAZ version]) + AC_MSG_RESULT([$YAZVERSION]) + if test "$2"; then + have_yaz_version=`echo "$YAZVERSION" | awk 'BEGIN { FS = "."; } { printf "%d", ([$]1 * 1000 + [$]2) * 1000 + [$]3;}'` + req_yaz_version=`echo "$2" | awk 'BEGIN { FS = "."; } { printf "%d", ([$]1 * 1000 + [$]2) * 1000 + [$]3;}'` + if test "$have_yaz_version" -lt "$req_yaz_version"; then + AC_MSG_ERROR([$YAZVERSION. Requires $2 or later]) + fi + if test "$req_yaz_version" -gt "2000028"; then + YAZINC="$YAZINC -DYAZ_USE_NEW_LOG=1" + fi + fi + fi +]) + diff --git a/yazpp.m4 b/yazpp.m4 new file mode 100644 index 0000000..63be11e --- /dev/null +++ b/yazpp.m4 @@ -0,0 +1,52 @@ +AC_DEFUN([YAZPP_INIT], +[ + AC_SUBST(YAZPPLIB) + AC_SUBST(YAZPPLALIB) + AC_SUBST(YAZPPINC) + AC_SUBST(YAZPPVERSION) + yazppconfig=NONE + yazpppath=NONE + AC_ARG_WITH(yazpp, [ --with-yazpp=DIR yaz++-config in DIR (example /home/yaz++-0.8)], [yazpppath=$withval]) + if test "x$yazpppath" != "xNONE"; then + yazppconfig=$yazpppath/yaz++-config + else + if test "x$srcdir" = "x"; then + yazppsrcdir=. + else + yazppsrcdir=$srcdir + fi + for i in ${yazppsrcdir}/../../yaz++ ${yazppsrcdir}/../yaz++-* ${yazppsrcdir}/../yaz++; do + if test -d $i; then + if test -r $i/yaz++-config; then + yazppconfig=$i/yaz++-config + fi + fi + done + if test "x$yazppconfig" = "xNONE"; then + AC_PATH_PROG(yazppconfig, yaz++-config, NONE) + fi + fi + AC_MSG_CHECKING(for YAZ++) + if $yazppconfig --version >/dev/null 2>&1; then + YAZPPLIB=`$yazppconfig --libs $1` + YAZPPLALIB=`$yazppconfig --lalibs $1` + YAZPPINC=`$yazppconfig --cflags $1` + YAZPPVERSION=`$yazppconfig --version` + AC_MSG_RESULT($yazppconfig) + else + AC_MSG_RESULT(Not found) + YAZVERSION=NONE + fi + if test "X$YAZPPVERSION" != "XNONE"; then + AC_MSG_CHECKING([for YAZ++ version]) + AC_MSG_RESULT([$YAZPPVERSION]) + if test "$2"; then + have_yaz_version=`echo "$YAZPPVERSION" | awk 'BEGIN { FS = "."; } { printf "%d", ([$]1 * 1000 + [$]2) * 1000 + [$]3;}'` + req_yaz_version=`echo "$2" | awk 'BEGIN { FS = "."; } { printf "%d", ([$]1 * 1000 + [$]2) * 1000 + [$]3;}'` + if test "$have_yaz_version" -lt "$req_yaz_version"; then + AC_MSG_ERROR([$YAZPPVERSION. Requires $2 or later]) + fi + fi + fi +]) +